First Bathroom:
I woke up one morning and decided to stain the vanity. The hubs and I love how much storage space it gives, so we opted to save ourselves some money and keep it, but we were not a fan of the out-datedness of it.
So this is where I came in. After some elbow grease, a orb-sander, a few 60 grit sand paper sheets ,a lot of patience and some stain and spray paint we have this:
If you are looking to save money and want a drastic change, this is the project for you. This project was $13.00 (spray paint and stain), which is a huge savings compared to the cost of a new vanity!
To get there I took the doors and drawers off and got to sanding. (Heads-up this took a while at first, so that's why I eventually went to 60 grit and worked just fine).
I took care of the doors outside and stained them in the garage. You can use pretty much anything to apply the stain, I used a stain sponge.
The stain I used was Minwax PolyShades Stain and Polyurethane combo in Mission Oak.
I used this stain, with polyurethane in it, which saved a lot of time and LOVE how closely it matches the blinds!
I also went ahead and painted all of the hardware on the vanity the same color as what I painted the vent (Rust-oleum Caterpillar Yellow).
I also went ahead and started to paint the trim around the window on the floors. Definitely cleans things up if I say so myself!
We just need to switch up the vanity, the faucet and add a little tile and this bathroom will be in tip-top shape!
This is our tiny half-bath.
This bathroom didn't really need a lot...it is small anyways.
We switched out the light with this one, got our standard bamboo blinds from Overstock, slapped up a few coats of paint (Putty in My Hands),...
and I found this mirror from World Market and scooped it right up. Since this bathroom doesn't really have any storage, the shelf helps a ton.
This room is pretty much done, we can add some spice with crown molding if we want, or wainscoting, but it all depends on how we are feeling.
No comments:
Post a Comment